Serving Central Pennsylvania since 1984Call 814-857-7566
COMPLETE FLUID POWER SERVICES
Hydraulic Hose
Start with the hose, the equipment and the work it needs to do. Share the hose markings, assembly length and fitting details with World Wide Hose & Supply.
Start with the hose and the application.
An existing assembly or clear photographs can help describe both ends and the routing. If available, include the requirements from the equipment documentation.
Equipment make and model
Hose markings and inside diameter
Assembly length and routing
Fluid, temperature and working-pressure requirements from the equipment documentation
Fitting details at both ends
TR2MT – 2SN/R2AT MINETUFF
Two high-tensile steel wire braids. Working pressure varies by size; see specifications. The supplied manufacturer sheet describes medium-pressure service with petroleum-based hydraulic fluids, hot oil, grease, lubricants, crude oils, air and water. Construction: black, seamless, oil-resistant synthetic-rubber tube; black synthetic-rubber cover resistant to weather, oil, fuel, ozone and abrasion.
Constant operating temperature: −40°F to +212°F (−40°C to +100°C). Operating above +212°F (+100°C) may materially reduce hose life. Air service: maximum +160°F (+70°C); for air or gas above 250 PSI (1.7 MPa), the cover should be pin-pricked. The sheet lists SAE 100 R2AT, ISO 1436-1 – SAE 100 R2AT/R2S, EN 853 2SN and MSHA IC-152/16 approved flame resistance. Confirm current manufacturer requirements and the exact hose, size and application before selection.
Size code | Inside diameter (in) | Inside diameter (mm) | Outside diameter (in) | Outside diameter (mm) | Max working pressure (PSI) | Min bend radius (in) | Min bend radius (mm) | Weight (lb/ft) | Alfacrimp one-piece series | Two-piece ferrule, non-skive |
|---|---|---|---|---|---|---|---|---|---|---|
04 | 1/4 | 6 | 0.57 | 14.5 | 5800 | 4 | 100 | 0.22 | B | AF2 |
05 | 5/16 | 8 | 0.63 | 16.1 | 5000 | 4.6 | 115 | 0.23 | B | AF2 |
06 | 3/8 | 9.5 | 0.72 | 18.2 | 4800 | 4.9 | 124.5 | 0.32 | B | AF2 |
08 | 1/2 | 12.7 | 0.84 | 21.3 | 4000 | 6.8 | 172.7 | 0.36 | B, D | AF2 |
10 | 5/8 | 15.9 | 0.96 | 24.5 | 3630 | 7.8 | 198.1 | 0.45 | B, D | AF2 |
12 | 3/4 | 19.1 | 1.13 | 28.6 | 3120 | 9.4 | 238.8 | 0.58 | B, D | AF2 |
16 | 1 | 25.4 | 1.44 | 36.6 | 2400 | 11.8 | 299.7 | 0.83 | B, D | AF2 |
20 | 1 1/4 | 31.8 | 1.81 | 46 | 1820 | 16.5 | 419.1 | 1.19 | D | AF2 |
24 | 1 1/2 | 38.1 | 2.08 | 52.8 | 1310 | 19.6 | 497.8 | 1.37 | D | AF2 |
32 | 2 | 50.8 | 2.58 | 65.6 | 1200 | 24.8 | 629.9 | 1.86 | D | AF2 |
Specifications transcribed from the supplied manufacturer sheet; validate current model and size before selection.
Alfabiotech 4000 MINETUFF – ABT4K
Four high-tensile steel spirals. Nominal 4,000 PSI series; working pressure varies by size as shown in the specifications. The supplied manufacturer sheet describes demanding pressure, pulsing and flexing applications, with an abrasion-, ozone- and hydrocarbon-resistant synthetic-rubber cover. Temperature range: −40°F to +250°F (−40°C to +121°C).
The sheet states: exceeds SAE 100R12 for ¾-inch and 1-inch sizes; exceeds EN856 4SH for 1½-inch and 2-inch sizes; ISO 18752/CC with 1,000,000+ impulse cycles for all sizes; and MSHA IC-152/16 approved flame resistance. Manufacturer lengths as printed: random up to 1 inch; 200 feet for 1¼-inch through 2-inch sizes. These lengths do not establish shop stock or assembly availability. Confirm current manufacturer requirements, fluid compatibility and the exact application before selection.
Size code | Inside diameter (in) | Inside diameter (mm) | Outside diameter (in) | Outside diameter (mm) | Max working pressure (PSI) | Min bend radius (in) | Min bend radius (mm) | Weight (lb/ft) | Alfacrimp one-piece series | Two-piece ferrule, non-skive | Two-piece ferrule, skive/interlock |
|---|---|---|---|---|---|---|---|---|---|---|---|
06 | 3/8 | 9.5 | 0.79 | 20.1 | 4000 | 2.9 | 73.7 | 0.42 | D | AF4 | |
08 | 1/2 | 12.7 | 0.91 | 23.1 | 4000 | 3.5 | 88.9 | 0.51 | D | AF4 | |
10 | 5/8 | 15.9 | 1.04 | 26.4 | 4000 | 4.6 | 116.8 | 0.63 | D | AF4 | |
12 | 3/4 | 19.1 | 1.16 | 29.5 | 4000 | 4.7 | 119.4 | 0.83 | D | AF4 | AS4 |
16 | 1 | 25.4 | 1.48 | 37.6 | 4000 | 5.9 | 149.9 | 1.11 | D | AF4 | AS4 |
20 | 1 1/4 | 31.8 | 1.8 | 45.7 | 4000 | 10.2 | 259.1 | 1.53 | D | AF4 | |
24 | 1 1/2 | 38.1 | 2.04 | 51.8 | 4200 | 16.5 | 419.1 | 1.99 | XF2 | ||
32 | 2 | 50.8 | 2.63 | 66.8 | 4000 | 20.8 | 528.3 | 3.01 | F | XF2 |
Specifications transcribed from the supplied manufacturer sheet; validate current model and size before selection.
Alfabiotech Evolution E6K Series – 6000 PSI Minetuff Hydraulic Hose
Four/six high-tensile steel spirals; the supplied sheet does not assign a spiral count to each size. Working pressure: 6,000 PSI at 68°F; see size specifications. The supplied manufacturer sheet describes demanding pressure, pulsing and flexing applications. Its abrasion-, ozone- and hydrocarbon-resistant synthetic-rubber cover is smooth through 1 inch and wrapped over 1 inch. Temperature range: −40°F to +250°F (−40°C to +121°C).
Compliance as printed: DIN EN856 4SP for ¼-, ⅜- and ½-inch sizes; DIN EN856 4SH for ¾-inch and 1-inch sizes; SAE 100R15 for 1-inch through 2-inch sizes; ISO 18752/CC with 1,000,000+ impulse cycles and MSHA IC-152/16 approved flame resistance for all sizes. Manufacturer lengths as printed: random up to 1 inch; 200 feet for 1¼-inch through 1½-inch sizes; 100 feet for 2 inches. These lengths do not establish shop stock or assembly availability. Confirm current manufacturer requirements, fluid compatibility and the exact application before selection.
Size code | Inside diameter (in) | Inside diameter (mm) | Outside diameter (in) | Outside diameter (mm) | Max working pressure (PSI at 68°F) | Min bend radius (in) | Min bend radius (mm) | Weight (lb/ft) | Alfacrimp one-piece series | Two-piece ferrule, skive | Two-piece ferrule, interlock |
|---|---|---|---|---|---|---|---|---|---|---|---|
04 | 1/4 | 6.4 | 0.67 | 17 | 6000 | 2.36 | 60 | 0.35 | S | AS4 | |
06 | 3/8 | 9.5 | 0.78 | 19.8 | 6000 | 2.95 | 75 | 0.42 | S | AS4 | |
08 | 1/2 | 12.7 | 0.89 | 22.5 | 6000 | 3.54 | 90 | 0.48 | S | AS4 | |
10 | 5/8 | 15.9 | 1.09 | 27.8 | 6000 | 3.94 | 100 | 0.8 | S | XF1, YS1 | |
12 | 3/4 | 19.1 | 1.2 | 30.6 | 6000 | 4.72 | 120 | 0.93 | S, F | XF2, YS2 | |
16 | 1 | 25.4 | 1.5 | 38.2 | 6000 | 5.91 | 150 | 1.3 | S, F | XF2, YS2 | |
20 | 1 1/4 | 31.8 | 1.87 | 47.6 | 6000 | 8.86 | 225 | 2.01 | S, F | XF1, YS1 | |
24 | 1 1/2 | 38.1 | 2.14 | 54.4 | 6000 | 12.01 | 305 | 2.8 | S | XF1, YS1 | |
32 | 2 | 50.8 | 2.7 | 68.7 | 6000 | 14.96 | 380 | 4.09 | ZF1 |
Specifications transcribed from the supplied manufacturer sheet; validate current model and size before selection.
Discuss your application
Visit our Custom Hose Assemblies page for the existing service information, or contact the shop to discuss your assembly.
Call 814-857-7566 or visit 4209 Clearfield-Woodland Highway, Mineral Springs, PA 16855. Call for current hours and availability.
Additional Hose Products
Non-Conductive Hose
Air and water service where contact with oil or oily mists is frequent. Use in manufacturing plants, maintenance shops, and industrial facilities requiring high oil resistance and electrical non-conductivity. Air compressors. Pneumatic tools. Equipment in environments exposed to lubricants or petroleum-based fluids. Fuel transfer applications involving unleaded gasoline and diesel fuel.
Manufacturer limitations: not recommended for biodiesel or kerosene; single-media fuel transfer; aromatic content no more than 50%. Confirm the exact hose and application with the shop.
NRP Jones A803 All Temp Air Brake Hose
High temperature, medium pressure hydraulic applications using petroleum based hydraulic fluids. Also, for gasoline, diesel fuel, oil, water, and air.
Cover: Blue, oil resistant polyester braid impregnated with Neoprene (CR).